Oil Burners for the Furnace – The Most Important Information


Fuel burners are an important piece of fuel heating equipment. The stove must be adjusted in an oil fired boiler. Learn the most important thing about gas stoves based on changing fuel parameters.

Advantages of an oil-fired boiler After a burner replacement, 

An oil-fired boiler can also be used as a gas boiler. Dual-fuel burners are being developed that can convert fuel oil to natural gas without the burner having to be replaced. However, they are rarely used in boilers in private homes. Due to the high price

Oil and gas burners are injected into the heating boiler or provide steam fuel. During this process, the fuel is fully pumped. And only a mixture of oil and air burns.

Proper oil quality is essential for the proper operation of an oil burner. 

The most important dynamic cord for the combustion process. You need to heat the oil to get the right texture. The oil in the oven is heated by an electric oil heater. It works with a nozzle and has a streamlined powerband. The heater immediately adjusts the power according to the heating needs. 

This reduces power consumption. 

As soon as the fuel reaches a predetermined temperature, for example 80°C, it sends a signal to the thermostat control unit. The control unit first turns on the fan. Then start the ignition system. Then open the fuel shut-off valve. The air-oil mixture burns according to the flame sensor readings.

If the flame disappears when starting the oven, turn off the fuel supply immediately. The device restarts the oven and attempts to ignite the mixture. However, if the mixture does not burn out in time, the oven will turn off.

The electronic control unit allows you to set the minimum fuel consumption after starting and adjusting the burner. If the machine oil consumption decreases (for example, due to the nozzle closing by 10%), the service sensor signal appears on the display.

The burner must be the same for all boilers in order to achieve complete energy-saving combustion, otherwise the efficiency of the boiler will be reduced. Thus, more oil is used to generate the same amount of heat.

Oil burner – Type

The fan oven can be primary or secondary. The efficiency is changed by turning the burner on or off in the boiler with the main burner. Two-phase boilers operate in the initial phase with low energy consumption. And the burners of the second phase with the power provided by the second phase ensure the economical operation of the heating system. 

The rebar bending machine is equipped with a safety system that monitors the operation of the system, turns off the burner and shuts off the fuel supply in the event of a malfunction.

Two-stage burners are better than single-stage ones. 

Properly selected oil burners ensure the durability and high energy efficiency of the boiler. As well as reducing emissions

If you own a car, you know that owning a vehicle requires repair, maintenance, and maintenance. But imagine that you have five different car care functions. It gives you an idea of ​​how to manage an industrial production site depending on the profitability of a large number of high-end high-performance devices with ten to twenty cars at the same time.

Industrial and commercial equipment needs.

To be maintained for ease of operation and long service life. Machine maintenance is a very time-consuming and versatile task. Cleaning involves the replacement of spare parts. In particular, fuel equipment must be analysed by an oil testing laboratory to ensure that hazardous materials do not interfere with its operation.

Reputable laboratories collect lubricant samples from your machines. Then analyse the chemical properties of the material. Contamination Detection and Debris Detection Let’s take a look at the types of tests used in this lab to get a general idea of ​​the health of your device. Flash point analysis reveals contamination. 

The technician determines the degree of contamination of the sample by measuring the combustion temperature of the fuel vapour. This is because everything has a predetermined and known ignition temperature. If the tester senses that the sample temperature is lower than expected, it knows that the samples are contaminated with fuel or other undesirable substances.


Please enter your comment!
Please enter your name here